Available Options

Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable

Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable

Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable
Product Information

Your price: $348.99

Lowest Price Guaranteed
More info!
Average Rating
Brand:
Model:
Bronco Sport
Drive now, Pay later with Affirm!
or with PayPal

Both options will be available upon checkout.

Ford Bronco Sport Cold Air Intake - 2.0L - Cotton Cleanable free shipping
MAXIMUM PERFORMANCE.
This cold air intake for your Ford Bronco Sport 2.0L was engineered to minimize air restriction and flow better than stock. This kit comes with a large front scoop, a massive airbox and filter, and intake tubes that connect all the way to the turbo.



THE SOUND OF PERFORMANCE.
This intake removes the restrictive baffles that hurt performance and quiet down your turbo. Click the play button to listen from outside and inside the cab.


 
HUGE TUBE AND FILTER.
The inlet at the filter leads to unrestricted airflow all the way to the turbo through the high-flow intake tube.



LESS RESTRICTIVE SCOOP.
The S&B scoop is less restrictive than OEM, allowing for more airflow and better performance.





CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

About Manufacturer

S&B Filters is a manufacturer of cold air intakes, filters and other performance parts, specializing in diesel/gas trucks and SUVs. Holding true to our goal, we engineer intake systems to greatly reduce airflow restriction, while still protecting your engine and test our product against our competitors following ISO 5011 standards. We keep our quality high and our pricing low by making almost everything ourselves in the U.S.


Breathe easy. Your engine and warranty are protected.
A mountain of dust and our 1/2 million dollar lab is how far we've gone to make sure your investment is protected.



Tested to a higher standard.
S&B tests to the internationally accepted ISO 5011 Standard when testing for airflow, efficiency and capacity. This is the same protocol used by most of the large automakers.

Airflow testing shows us how we compare to stock and our competitors. The goal is to beat both.

We test for efficiency to make sure that your engine is protected from debris while sucking in even more air. Lastly, we monitor the capacity of the filter to see how much dirt it can hold before needing to be serviced.



Precision and accuracy.

Our environmental control system is top of the line. S&B strives for accuracy and repeatability. In order to have dependable results, you have to have tight control over the humidity, temperature and barometric pressure.




Better Airflow

It's important to know how we stack up against stock and our competitors in order to be the best. We mount each intake system on our test equipment to measure the airflow from zero to the max CFM of the vehicle. We then compare the results and make design changes until we have maximized the airflow while still protecting your engine.


Protect your engine.
While airflow is important, it is equally critical to insure that your investment is protected. To do so, we first determine the max CFM the vehicle will generate at wide open throttle as it is more difficult to stop dust the greater the airflow. We then start pulling this amount of air through the intake while literally shooting fine particles of dust at the filter. Any dust bypassing the filter will be caught in the absolute blanket to determine the efficiency.

Some competitors have testing done at low CFMs in order to show higher efficiency rates, so beware.




We're not kidding.
Our testing is so controlled that we even heat the absolute blankets pre and post testing in order to remove the humidity. The absolute blankets catch any dust that gets past the filter during testing in order to determine the efficiency rate.

Removing the humidity insures that you are only weighing what actually bypassed the filter. Protecting your engine while providing better airflow is our top priority.
 

Product Reviews

Average user rating

5 / 5

0 reviews

5
4
3
2
1

Two locations to serve you

AUSTIN, TX

22108 SH 71 W.
Spicewood, TX 78669
512-982-9393
Mon-Fri: 9 AM - 6PM CST
Sat-Sun: Closed

LOS ANGELES, CA

2716 Dawson Ave.
Signal Hill, CA 90755
562-981-6800
Mon-Fri: 9 AM - 6PM PST
Sat-Sun: Closed